SteadyGim6 PLUS
eX250 Pro FPV Racer
iPower 1306 3100KV
eX250 Sport
IFLIGHT G15 3-Axis Bruslhess Gimbal
IFLIGHT G40 Lite

New Products

  • IFLIGHT 5.8GHz 40CH Adjustable Output Power (25-600mw) FPV Transmitter

    IFLIGHT 5.8GHz 40CH Adjustable Output Power (25-600mw) FPV Transmitter

    The IFLIGHT 5.8GHz Adjustable RF Power (25-600mw) FPV Transmitter. Easily change your output RF power at the push of a button, 25mw, 200mw, or 600mw.

  • IFLIGHT G15 3-Axis  Handheld Brushless Gimbal

    IFLIGHT G15 3-Axis Handheld Brushless Gimbal

    G15 is an affordable 3-axis gimbal stabilizer with solid carbon fiber frame, strong, silent brushless motors and equipped with joystick built into the grip. It features 2 gyro sensors and a 32-bit BASECAM controllers.Max. payload of 1-2.5kgs, ideal for DSLR cameras.Ready to use product, tested and shipped with pre-configured settings.

  • Super Light Integrated 800mm Full Carbon Fiber Quadcopter Frame

    Super Light Integrated 800mm Full Carbon Fiber Quadcopter Frame

    This super light,full carbon fiber maetial quadcopter frame kit is special made for some customer need extremly light quadcopter frame for photographing .Pure 3K carbon fiber intergrated made with cover shell design , it can flight under a rainly weather or bad weather , it suports 17 to 19 inch propellers with long time flight,iPower MT4114 290kv or iPower MT5208 320KV.It featured 65 minutes long flight time.

  • Crazy Runner H230 FPV Racing Quadcopter

    Crazy Runner H230 FPV Racing Quadcopter

    The crazy runner H230 multirotor frame is one of the top performing quads in its class. Designed with durability and ease of use, this Quad Frame is more durable, compact and more agile than your average frame.Stylish, red anodized frame parts really give this frame character, with tough and durable design to rip up the sky.

  • eX250 Sport FPV Racing ARF Quadcopter

    eX250 Sport FPV Racing ARF Quadcopter

    Pre-Assembled in (ARF) Almost Ready to Fly and (RTF) Ready to Fly configurations-Multi-layer carbon fiber airframe keeps things light while providing the strength racers demand and allowing quick change of components

  • SP Racing F3 Flight Controller-Cleaflight(deluxe)

    SP Racing F3 Flight Controller-Cleaflight(deluxe)

    Cleanflight can be used on multirotor aircraft and fixed-wing aircraft, it supports a variety for shapes and motor counts, not limited to quadcopters, hexacopters, octocopters, tricopters and planes. Cleanflight is Open-Source flight controller software which is 32-bit version of the original 8-bit MultiWii code.

  • iPeaka MINI BLHELI 20A(oneshot25)

    iPeaka MINI BLHELI 20A(oneshot25)

    iPeaka MINI Series ESCs are developed for racing multicopters, based on BLHeli firmware and support OneShot125. They are compatible with Skyline32, Naze32, Pixhawk, CC3D and other mainstream Flight Controllers. They use authentic electronic components to ensure high quality and enhance the current endurance ability.

  • iPeaka MINI BLHELI 15A(oneshot25)

    iPeaka MINI BLHELI 15A(oneshot25)

    iPeaka MINI Series ESCs are developed for racing multicopters, based on BLHeli firmware and support OneShot125. They are compatible with Skyline32, Naze32, Pixhawk, CC3D and other mainstream Flight Controllers. They use authentic electronic components to ensure high quality and enhance the current endurance ability.

  • FlyCat 260 V2 FPV Racer Frame Kit

    FlyCat 260 V2 FPV Racer Frame Kit

    The FlyCat260 V2 is compact and functional design features proper electronics positioning to minimize mutual EMI / RF interference and optimize FPV gear performance, while also protecting all vital components by the airframe armor. Yet, all components remain easy to access! It supports both 5″ and 6″ propellers easily.

  • IFLIGHT eX250 FPV Race Pro Kit

    IFLIGHT eX250 FPV Race Pro Kit

    IFLIGHT eX250 FPV Race Pro Kit is a mini quad frames come with built-in PDB (power distribution board) bottom plates, which saves quadcopter builders a lot of time and troubles. ESC’s, Battery connector, even your FPV system can be soldered directly on to the PDB, that keeps the use of wires to the minimal. This not only reduces weight but also makes a super clean build.

Latest News

eX250 Sport FPV Racing ARF Quadcopter
10/29/15

eX250 Sport FPV Racing ARF Quadcopter
Key Features

-Pre-Assembled in (ARF) Almost Ready to Fly and (RTF) Ready to Fly configurations-Multi-layer carbon fiber airframe keeps things light while providing the strength racers demand and allowing quick change of components-Integrated electronics all combined on a PCB with a modular design (CC3D, OSD, & PMU with ESC's on a seperate quick change module)-The battery position is right on the CG creating balanced and precise flight characteristics in all flight orientations

iFlight flycat260 racer Promotions end!!
8/28/15
iFlight Flycat260 promotion end. 
 
There were about 500 participants, thank you for joining in this promotion!
Below is the promotion lottery live video:
Free flycat260 racer has been shipped out to the first prize winner ----- Michael Lassiter 
For second & third prize winners, we have sent the coupon codes by email!

Video

.
 

About Us

iFlight-RC Ltd is a manufacturing company producing RC model products including brushless motors,camera gimbals,3 aixs camera stabilizers,gimbal motors,multi-rotors,speed controllers,RC Toys,RTF multi-rotors,multi-rotor airframes,and a large array of RC related accessories.

 

Company principles

We have always adhered to the principle of "Integrity, Credibility, and Win-Win Success" with our customers. We treasure our high credit standing and value our clients throughout the world.

 

Contact iFlight

iFlight Model Limited

Factory ADD:2F-3F,Pu Zi Indulstry Area,Li Zhen Rd,
Office ADD:Room 1411,NO.8 City Jin Bao,NO.5 He

Tel:86-752-3866695             Fax:86-752-3218970

Customer Service:

Sales:sales@iflight-rc.com info@iflight-rc.com