Product Description

SucceX F4 V2.1 TwinG FC (Barometer) Specifications

-MCU:STM32F405R6T6

-IMU:Twins ICM20689,Twins Gyros built-in(SPI)

-Baro:YES

-Betaflight OSD:YES

-BEC:5V 2.5A

-Blackbox:32MB

-Telemetry:Support (RX6)

-5 x Uarts(1 2 3 4 5)with build-in inversion

-8 x  Dshot/Proshot/Oneshot output

-8 x individual ESC power/ signal pads

-1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

-VTX protocol:IRC Tramp

-WS2812 led Strip:YES

-Beeper:YES

-Input:2-6S(5-36V)

Betaflight

-Firmware:betaflight_4.0.5_STM32F405.hex

-Cli dump file:IFF4_TWIN_G.config

Physical

-Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm

-Dimensions:36*36mm

-Weight:6.3g

SucceX 50A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC

Features:

- 8 layers double-sided PCB board;

- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;

- 32bit FO51K86 MCU, 48mHz maximum clock speed;

- TDK MLCC Low ESR ceramic capacitors;

- Top grade NTMFS5C430NL MOSFET;

- Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection

SucceX 50A 2-6S Specification:

- Dimension: 43*39mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight:14.4g

- Supports 2-6S lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

- Current sensor: Yes

-Telemetry:Supported

- BEC: No

- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.

- Target: iFlight-BL32-4IN1

- BLHeliSuite download :http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

RECOMMENDATION:

- No additional capacitor needed up to 5S!

- To encounter back EMF and ensure the longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!

Package included:

- 1x SucceX F4 V2.1 TwinG FC

- 1x SucceX 50A 2-6s BLHeli_32 4-in-1 ESC

Write a review

Choose a file or drag it here.
Note: HTML is not translated!
    Bad           Good
Captcha

When you order from iflight-rc.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

Support