We are proud to offer a Cidora SL5 4S 6S FPV Drone - BNF with our best iFlight components installed and pre-tuned! SL5 is a 5" size BNF (Bind-and-Fly) quadcopter that comes fully built with everything you need to liftoff!
Different power version (4S, 6S cell count) to fit most pilots requirements. Choose your receiver option to get your FrySky or Crossfire installed and ready to be bound to your radio.
- Full 3K Carbon Fiber airframe
- Easy arm swaps -215mm wheelbase，115g
- Popular Squish X configuration
- SucceX F7 TwinG Bluetooth with 50A 4in1 ESC stack
- Total Dimensions: 165*138mm (body dimension)
- Frame Wheelbase: 215mm
- SucceXF7 TwinG Bluetooth FC
- SucceX 50A 2-6s 4-in-1 ESC Dshot1200
- XING CAMO X2306 2450KV (4S )/ XING CAMO X2306 1700KV(6S)
- Caddx.us Ratel 2.1mm FPV cam
- Nazgul 5140 propellers
- Weight: 384.2 (without GoPro TPU mount)
SucceX F7 TwinG BT Flight Controller(TwinICM20689)
- MCU：216MHz STM32F722RET6
- Gyro: 2x ICM20689（SPI）
- Baro: Yes (Altitude on your OSD)
- Betaflight OSD：YES
- Bluetooth wireless adapter (Antenna integrated, can be linked to the SpeedyBee smartphone app)
- Blackbox: Onboard 32MB
- 5x Uarts
- 8x Motor outputs
- 8-pin 4in1 ESC port
- 4-pin VTX connector
-CLI dump file：IFLIGHTF7_TWIN_G.config
- Mounting hole：30.5*30.5mm，φ4mm with Grommets φ3mm
SucceX 50A 2-6S 4-in-1 ESC Dshot1200
- Dimension: 43*39mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Volts input: 2-6S
- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
- Current sensor: Yes
- BEC: No
- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
- Target: iFlight-BL32-4IN1
- BLHeliSuite download (BL32):http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file
5.8G 1000mW VTX
- Tramp telemetry with OSD/Lua script frequency and output power control
- Stable power transmission, ideal for long range flights
- Power settings 25mW/200mW/400mW/800mW/1000mW;
- 48 Channels including Raceband
- Frequency fast lock, soft start to reduce interference with other pilots
- Built-in output power self-check function;
- Full format video format: NTSC /PAL;
- Wide input voltage range. low power consumption:
- 7V～28V，+12V/[email protected];
- Small size: 36mm×36mm×8mm;
- Mounting holes 4-M3
- Lightweight: ≤11g(excluding antenna)
Recommend Parts (Not included):
- TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 with ND8 Filter
- TPU 3D Printed Camera Mount for GoPro Session
Recommend batteries (not included):
4S 1300mAh to 2000mAh
6s 1050mAh to 1500mAh
-1x Cidora SL5 4S 6S FPV Drone - BNF
-2 sets Nazgul 5140 propellers
-1 set LED Lights
NOTE: The Hero 7 camera and TPU print camera mount are not included.
When you order from iflight-rc.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!