Revobee32 MINI F4 32K FPV Flight Tower System

Revobee32 MINI F4 32K FPV Flight Tower System

$41.99
Product Code: FC04596
Total Price: $41.99

Product Description

The iFlight Mini Revobee32 F4 32K Flight Tower System Stack comes with OSD,5V BEC and 25A 4 in 1 BLHeli_S ESC.

The iFlight REVO Bee32 flight controller with OSD is the most advanced, performance-driven, flight controller ever designed. Capable of running 32kHz gyro sample, PID loop, and motor loop, processing all calculations in real time. The Revo Bee32 is truly at the top of its class. The Revo Bee32 uses an F405 MPU and an Invensense 20608 gyro to give you the BEST performance possible. This gyro is by far the most noise free and accurate gyro available.

Difference between Acro 6DOF and Deluxe 10DOF is that Acro 6DOF Acro version has no Barometer Sensor while Deluxe 10DOF has.


Please write to Target: Omnibus F43.2.0  

Recommended Motor: 11 size low kv motor equal to or lower than 4000kv , like iPower iX1106 4000KV.

Performance

The REVO Bee32 presents not only the BEST performance but also the most STABLE performance due to the amazing vibration rejection technology implemented in iFlight. Our filters allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! For most people tuning is not even required. Our boards come preloaded with software and defaults that should fly amazingly for 99% of people.


In addition to the vibration rejection technology, the SSG gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invense 20608 gyro has never been used in any flight controller before and definitely, gives you the leading advantage over others.


Software

Just go to the google store and download the latest configurator and you should be ready to connect. Drivers should no longer be needed.


Setup Simplicity

Setting up the RevoBee32 is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and remember the order 1, 2, 3, 4. Select your voltage on the bottom, as well as inverted or not. The Revo Bee32 also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.


Features

-Integrated vibration dampening dummies
-MCU : STM32F405
-On-board Betaflight OSD
-Integrated LC Filter
-High-Speed 32khz gyro(ICM-20608), lowest noise floor and highest sensitivity gyro ever used
-FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus, and other radio support
-Integrated buzzer driver
-ESC flashing and configuration built into the configurator
-Built-in 5v voltage BEC
-Mounting holes: 20mm squared to the center of holes


Mini F4 32K Flight control SPECS

-Item name : F4 32K Revobee32 FPV Stack
-Weight: 11g
-Mounting holes: 20mm squared to the center of holes


iPeaka 25A Dshot ready 4-in-1 ESC SPECS

-Item name: iPeaka 25A 4-in-1 ESC 
-Weight: 8g
-Mounting holes: 20mm squared to the center of holes
-Continuous current 18A and 25A burst per motor
-Supply voltage 2-4S Lipo
-Silabs EFM8BB21F16G 50mhz MCU
-BLHeli_S firmware
-Supports SHOT, MULTISHOT,ONESHOT125
-Top quality MOSFET
-3oz high TG PCB board 


The iFlight Guarantee 

In addition to all the other amazing things the REVO Bee32 presents, Team iFlight FPV get access to iFlight’s tech support which will include step-by-step help with installation, tuning, and anything else that may arise with your REVO Bee32. We have by far the best support system and community in the industry. Join our slack and talk to other users, or contact support directly.


Package included:

- 1pc x Revo Bee32 Mini F4 flight controller with OSD/BEC 
- 1pc x iPeaka 25A BLHeli_S D-shot 4-in-1 ESC
- 4pc x M3 Damper
- Cable Set

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

When you order from iflight-rc.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!