iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller, it is base on the 32-bit simple Brushless gimbal controllers. It features built-in frame IMU, CAN-bus replace I2C for the IMU sensor and other periphery connection.
New Capabilities:
*Built-in Frame IMU
*Current sensor to measure battery power consumption
*CAN-bus to replace I2C for the IMU sensor and other periphery connection
*Dedicated 3x SPI/PWM ports for encoder connection
*Additional I2C port to connect 2nd IMU or encoders
*Built-in sound beeper
*Up to 6s LiPo battery is supported
Specifications:
Size of the board: 50×50 mm
The distance between the mounting holes: 45 mm
The diameter of the mounting holes: 3 mm
Power supply voltage: 8-26 V (3s-6s LiPo)
Maximum motor current: 1,5 A
5V output current to power external devices: up to 1 A
3V output current: 150 mA
GBM8036-90T Brushless Gimbal Motor
Features:
-Sealed Case to prevent contamination by dust and dirt.
-Hollow shaft for slipring
-Configuration:36N42P, prove more torque.
Specs:
Model NO.: GBM8036-90T
Weight: 492grams
Motor Can Dimension: 90mm(OD) x 36mm(Height)
Stator Dimension: 81mm(OD) x 12mm(Height)
Copper wire (OD): 0.20mm
Configuration: 36N42P
Internal Resistance: 11.7 ohms
Pre-wound: with 90 turns.
Wire length: 450mm including JR plug
Camera range (Torque): 5.0kg-6.5kg
Camera size: 5.0kg-6.5kg
Voltage: 11.1V
Current: 0.078A
Rotational Speed: 38rpm
Package included:
- 3 x iPower GBM8036-90T Gimbal Motor
- 1 x Alexmos 32BIT Extended BGC set with alum case
- 1 x Connecting cables set
-270x270.jpg)
-270x270.jpg)
