AlexMos 32 BIT Extended BGC with GBM8017-120T Combo Set

AlexMos 32 BIT Extended BGC with GBM8017-120T Combo Set

OverView

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller, Featured built-in Frame IMU, Current sensor to measure battery power consumption, CAN-bus to replace I2C for the IMU sensor and other periphery connectionNe...
$433.99
Product Code: G004628-5

Available Options

Product Description

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller, Featured built-in Frame IMU, Current sensor to measure battery power consumption, CAN-bus to replace I2C for the IMU sensor and other periphery connection


New Capabilities:

*Built-in Frame IMU

*Current sensor to measure battery power consumption

*CAN-bus to replace I2C for the IMU sensor and other periphery connection

*Dedicated 3x SPI/PWM ports for encoder connection

*Additional I2C port to connect 2nd IMU or encoders

*Built-in sound beeper

*Up to 6s LiPo battery is supported


Specifications:

Size of the board: 50×50 mm

The distance between the mounting holes: 45 mm

The diameter of the mounting holes: 3 mm

Power supply voltage: 8-26 V (3s-6s LiPo)

Maximum motor current: 1,5 A

5V output current to power external devices: up to 1 A

3V output current: 150 mA


iPower Motor GBM8017-120T SC Brushless Gimbal Motor

The GBM80-GBM90-GBM110 series motor by iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 6KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.


Features: 

-Sealed Case to prevent contamination by dust and dirt.

-Hollow shaft for slipring

-Configuration:24N28P,prove more torque.


Specs:

Model NO.: GBM8017-120T SC

Weight: 318g

Motor Dimensions: Dia 90mm x hgt  26mm

Stator Dimensions: Dia 80mm x hgt 17mm

Copper wire(OD):0.29mm

Configuration: 24N22P

Resistance: 15.2 ohms

Base center pitch: 25mm 35mm

Pre-wound: with 90 turns, Hollow shaft

Hollow Shaft Diameter: 12.6mm

Camera range (Torque): 1200-2800 grams

Voltage: 11.1V

Current: 0.066A

Max Current: 12A

Rotational Speed: 119 rpm


Package included:

- 3x iPower GBM8017-120T Gimbal Motor

- 1 x Alexmos 32BIT Extended BGC set with alum case

- 1 x  Connecting cables set

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Buy Chromium
Demos 12
Close

Chromium Demos

Check our main demos, layouts, shop and single product pages variants.