AlexMos 32 BIT Extended BGC with GBM6212H-150T Combo Set

AlexMos 32 BIT Extended BGC with GBM6212H-150T Combo Set

OverView

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller, it is base on the 32-bit simple Brushless gimbal controllers. It features built-in frame IMU, CAN-bus replace I2C for the IMU sensor and other periphery connection.
$333.99
Product Code: G004033-5

Available Options

Product Description

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller, it is base on the 32-bit simple Brushless gimbal controllers. It features built-in frame IMU, CAN-bus replace I2C for the IMU sensor and other periphery connection.


Features:

*Built-in Frame IMU

*Current sensor to measure battery power consumption

*CAN-bus to replace I2C for the IMU sensor and other periphery connection

*Dedicated 3x SPI/PWM ports for encoder connection

*Additional I2C port to connect 2nd IMU or encoders

*Built-in sound beeper

*Up to 6s LiPo battery is supported


Specifications: 

Size of the board: 50 x 50mm

The distance between the mounting holes: 45 mm

The diameter of the mounting holes: 3 mm

Power supply voltage: 8-26 V (3s-6s LiPo)

Maximum motor current: 1,5 A

5V output current to power external devices: up to 1 A

3V output current: 150 mA


iPower Motor GBM6212H-150T Brushless Gimbal Motor

The GBM62 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.


Specs:

Model NO.: GBM6212H-150T

Weight: 247g

Motor Dimensions: dia 68mm x hgt  28.8mm

Stator Dimensions: dia 62mm x hgt 12mm

Copper wire(OD): 0.21mm

Configuration: 24N22P

Resistance: 15.2 ohms

Base center pitch: 25mm 30mm

Pre-wound: with 150 turns,Hollow shaft

Hollow Shaft Diameter: 12.7mm

Camera range (Torque): 1200-2800 grams

Voltage: 11.1V

Current: 0.09A

Max Current: 12A

Rotational Speed: 212 rpm


Package included:

- 3x iPower GBM6212H-150T Gimbal Motor

- 1 x Alexmos 32BIT Extended BGC set with alum case

- 1 x  Connecting cables set

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Buy Chromium
Demos 12
Close

Chromium Demos

Check our main demos, layouts, shop and single product pages variants.