AlexMos 32 BIT Extended BGC with GBM5208H-200T Combo Set

AlexMos 32 BIT Extended BGC with GBM5208H-200T Combo Set

OverView

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller featured built-in frame IMU, a current sensor to measure battery power consumption, CAN-bus to replace I2C for the IMU sensor and other periphery connection.*Built-in Fram...
$293.99
Product Code: G003902-7

Available Options

Product Description

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller featured built-in frame IMU, a current sensor to measure battery power consumption, CAN-bus to replace I2C for the IMU sensor and other periphery connection.

*Built-in Frame IMU

*Current sensor to measure battery power consumption

*CAN-bus to replace I2C for the IMU sensor and other periphery connection

*Dedicated 3x SPI/PWM ports for encoder connection

*Additional I2C port to connect 2nd IMU or encoders

*Built-in sound beeper

*Up to 6s LiPo battery is supported


Specifications:

Size of the board: 50×50 mm

The distance between the mounting holes: 45 mm

The diameter of the mounting holes: 3mm

Power supply voltage: 8-26 V (3s-6s LiPo)

Maximum motor current: 1,5 A

5V output current to power external devices: up to 1 A

3V output current: 150 mA


iPower Motor GBM5208H-200T Brushless Gimbal Motor

The GBM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.


Specs:

Model NO.:GBM5208H-200T

Weight: 179g

Motor Dimensions: dia 63mm x hgt  24.5mm

Stator Dimensions: dia 52mm x hgt 8mm

Copper wire(OD): 0.27mm

Configuration: 12N14P

Resistance: 15.5 ohms

Base center pitch: 25mm 30mm

Pre-wound: with 200 turns,Hollow shaft

Hollow Shaft Diameter: 12.6mm

Camera range (Torque): 800-1550 grams

Voltage: 11.1V

Current: 0.066A

Max Current: 10A

Rotational Speed: 278 rpm


Package included:

- 3x iPower GBM5208H-200T Gimbal Motor

- 1 x Alexmos 32BIT Extended BGC set with alum case

- 1 x  Connecting cables set


Connecting encoders to the regular SimpleBGC 32bit board

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Buy Chromium
Demos 12
Close

Chromium Demos

Check our main demos, layouts, shop and single product pages variants.