text_empty
Product Description
Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency.
New Capabilities:
*Built-in Frame IMU
*Current sensor to measure battery power consumption
*CAN-bus to replace I2C for the IMU sensor and other periphery connection
*Dedicated 3x SPI/PWM ports for encoder connection
*Additional I2C port to connect 2nd IMU or encoders
*Built-in sound beeper
*Up to 6s LiPo battery is supported
Specifications:
Size of the board: 50×50 mm
The distance between the mounting holes: 45 mm
The diameter of the mounting holes: 3 mm
Power supply voltage: 8-26 V (3s-6s LiPo)
Maximum motor current: 1,5 A
5V output current to power external devices: up to 1 A
3V output current: 150 mA
iPower Motor GBM4108H-120T Brushless Gimbal Motor
Specification:
Model NO.: GBM4108H-120T
Weight: 102g
Motor Dimensions: 45x25mm
Stator Dimensions: 41x8mm
Copper wire(OD): 0.17mm
Hollow Shaft Diameter: 7mm
Configuration: 24N22P
Resistance: 11.2 ohms
Pre-wounded: with 120 turns
Bottom mounting holes: see the draft
Top mounting holes: 22mm, 30mm center to center
Camera range: 600-1200grams
Tes tMax Voltage: 11.1V
Max Voltage: 18.5V
No Load Current: 0.1A
Max Current: 6A
Test Rotational Speed: 627 rpm
Max Rotational Speed: 1045 rpm
Package included:
- 3x iPower GBM4108H-100T Gimbal Motor
- 1 x Alexmos 32BIT Extended BGC set with alum case
- 1 x Connecting cables set
NOTE: Slipring will not be compatible with this motors! If need slipring please choose ENCODER version!