Grid View:

iPower Motor GM3506 Brushless Gimbal Motor

The GM35 series motor by iPower Motors is the ultimate brushless gimbal motor for SLR and similar weight Cameras. This motor is designed for large-scale multi-rotor platforms looking to lift SLR sized gear – 1.5KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very s..

$23.99

AlexMos 32 BIT Extended BGC with GM110-8 System Combo

Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increasedthe stability which in turn also increases battery efficiency.What's encoder technology in brushless gimbal control system?The 3 axis stabilization gimbal system that relies on both acti..

$539.99

AlexMos 32 BIT Extended BGC with GBM8108-90T Combo Set

The GBM80-GBM90-GBM110 series motor by iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 6KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on..

$443.99

AlexMos 32 BIT Extended BGC with GBM8017-120T Combo Set

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller, Featured built-in Frame IMU, Current sensor to measure battery power consumption, CAN-bus to replace I2C for the IMU sensor and other periphery connectionNew Capabilities:*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU se..

$433.99

AlexMos 32 BIT Extended BGC with GM6208 150T Combo Set

SimpleBGC 32-bit Extended Gimbal Controller, it is built-in frame IMU, a current sensor to measure battery power consumption.*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU sensor and other periphery connection*Dedicated 3x SPI/PWM ports for encoder connection*Additional I2C port to connect..

$413.99

AlexMos 32 BIT Extended BGC with GM5208 Combo Set

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller featured built-in frame IMU, a current sensor to measure battery power consumption, CAN-bus to replace I2C for the IMU sensor and other periphery connection.*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU sensor and other ..

$293.99

AlexMos 32 BIT BGC with GBM8108-90T Combo Set

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers. This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% bac..

$369.99

AlexMos 32 BIT BGC with GBM8017-120T Combo Set

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back..

$359.99

AlexMos 32 BIT Extended BGC with GM4108H-120T Combo Set

Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency.New Capabilities:*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU sen..

$253.99

AlexMos 32 BIT BGC with GM4108H-120T Combo Set

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers. This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100..

$199.99

AlexMos 32 BIT BGC with GM6208 150T Combo Set

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers. This version of the controller is our new direction in the development of stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-co..

$259.99

AlexMos 32 BIT BGC with GM5208 Combo Set

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back..

$229.99

AlexMos 32 BIT BGC with GM110-8 Combo Set

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers. This version of the controller is our new direction in the development of stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-co..

$499.99

Gimbal Motor Slipring 8.5mm diameter

A gimbal assembly comprising, an outer gimbal having a longitudinal axis, an inner gimbal pivotally supported by the outer gimbal coaxially therewith, a motor mounted on the inner gimbal with the motor having motor leads, a pivot unit pivotally connecting the inner gimbal to the outer gimbal coaxially therewith at one end thereof, and a slip ring u..

$9.99

AlexMos 32 BIT Extended BGC with GM2804H-100T Combo Set

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller, it is base on the 32-bit simple Brushless gimbal controllers. It features built-in frame IMU, CAN-bus replace I2C for the IMU sensor and other periphery connection.New Capabilities:*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for ..

$199.99

AlexMos 32 BIT BGC with GM2804H-100T Combo Set

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back..

$159.99
Showing 1 to 16 of 62 (4 Pages)
Support